دليل مواد الدراسات العليا | الهندسة الميكانيكية
ME
509
ME
Description
Course Number:
0630509
Review of Newtonian mechanics. The principle of virtual work. D'Alemberts principle. Hamilton's principle. Lagrange's equations of motion. Case of impulsive forces. Conservation laws. Ralyleigh's dissipation function. Hamilton's equations. Motion relative to rotating frames. Rigid body dynamics. Gyroscopic effects. Canonical transformations. The Hamilton-Jacobi equation.
(3-0-3)
ME
511
ME
Description
Course Number:
0630511
Stress and strain in two and three dimensions. Plane theory of elasticity. Failure theories. Stress concentration. Residual Stresses. Thermal stresses. Contact stresses. Impact loading. Fracture mechanics and design. Fatigue and cumulative damage. Structural instability. Experimental stress analysis. Energy approach and numerical methods. Case Studies.
(3-0-3)
ME
512
ME
Description
Course Number:
0630512
Lagrange's equations. Response of multi-degree- of-freedom systems. Vibration of continuous systems. Approximate solutions. Introduction to nonlinear vibrations. Introduction to random vibrations. Spectral analysis.
(3-0-3)
ME
513
ME
Description
Course Number:
0630513
General concepts in the dynamic analysis and design of machines, with reference to machine tools. Structure compliance, integrity, static and thermal deformations, structure design concepts. Drive systems, slides and bearings. Feed drives. Types of control systems; numerical, adaptive and computer control. Steady and dynamic cutting forces. Dynamics of machine tools. Receptance concept. Interaction between cutting and structural response. Machine tool stability. Vibration reduction of machine tools in the design stage and in the field. Design for fabrication by bonding.
(3-0-3)
ME
514
ME
Description
Course Number:
0630514
Computer Graphics including solid modeling and image synthesis, curve and surface description, 3-D transformations. Use of prepackaged software. Review of optimization techniques: linear, non- linear and dynamic programming. Design applications in mechanical engineering systems.
(3-0-3)
ME
515
ME
Description
Course Number:
0630515
Mechanical behavior of materials: elastic and plastic behavior, yielding fracture, crack propagation, fatigue, creep. Behavior at low and high temperatures. Engineering properties of metallic and non-metallic materials. Functional requirements of engineering materials. Material selection process, criteria and techniques. Aspects of design for selection. Applications: material selection for springs, fasteners, gears, bearings etc. Material selection for abrasive-wear and corrosion- resistance applications. Case studies.
(3-0-3)
ME
516
ME
Description
Course Number:
0630516
Component factors in durability and reliability. Reliability concepts and assessments. The performance requirements. Static and dynamic reliability models. Random variables in design. Sampling estimation and confidence. Maintainability down-time and repair-time. Design factors determining down-time. Maintainability prediction. Maintainability and reliability in contracts. Maintenance handbook.
(3-0-3)
ME
517
ME
Description
Course Number:
0630517
Survey of single-variable unconstrained optimization methods. Multi-variable unconstrained optimization. Single and multi-variable constrained optimization techniques. Applications from mechanical design, vibrations, solid mechanics, and thermal fluid systems.
(3-0-3)
ME
518
ME
Description
Course Number:
0630518
An upper division of graduate technical elective treating topics in Engineering mostly not covered in other courses, chosen at the discretion of the Graduate Program Committee.
(3-0-3)
ME
519
ME
Description
Course Number:
0630519
Concept of stability. Lejeune-Dirichlet criterion. Nyquist criterion. Routh and Hurwitz criterion. Liapunov second method. Examples from rigid body dynamics. Effects of damping. Gyroscopic effects. Elastic stability under static load: Beam- columns, bars and frames, torsional buckling, buckling of rings, curved bars and arches. Dynamic instability: Divergence and flutter. Instability under nonconservative forces. Examples.
(3-0-3)
ME
520
ME
Description
Course Number:
0630520
A generalized treatment of the solution of steady and transient heat conduction in finite and infinite regions. Approximate and exact methods of solution of problems involving phase change, variable thermal properties, heat generation, and non-linear boundary conditions. Heat conduction in composite media and in anisotropic solids.
(3-0-3)
ME
522
ME
Description
Course Number:
0630522
Exact and approximate methods of solution of radiative heat transfer. Heat radiation of black bodies and non black bodies. Radiation between surfaces and through participating and non- participating media. Experimental methods. Radiation heat processes. Radiative properties of surfaces and gases. Multimode heat transfer in thermal systems. Numerical modeling.
(3-0-3)
ME
523
ME
Description
Course Number:
0630523
Differential forms of the balance laws of mass, linear momentum, and energy, Boundary layer theory, Scale Analysis, Similarity solutions, Forced and free convention in laminar and turbulent, internal and external flows. Analogy between momentum and heat transfer. Heat and mass transfer in compressible flow.
(3-0-3)
ME
524
ME
Description
Course Number:
0630524
Air-Conditioning systems and their physchrometric process, analysis and performance of direct contact heat and mass transfer exchanges: cooling towers, analysis of extended surface heat exchangers, analysis of cooling coils, air conditioning control.
(3-0-3)
ME
525
ME
Description
Course Number:
0630525
Analysis and performance characteristics based on thermodynamics and fluid flow of non- conventional energy conversion systems.
(3-0-3)
ME
527
ME
Description
Course Number:
0630527
Thermodynamics review, Availability, Irreversibility, Entropy creation efficiency and effectiveness. Rankine cycle: Ideal and real cycle, effects of superheating, reheating, feed water heat regeneration, condenser. Fossil-fuel steam generations: water tube boilers, design of natural and forced flow, furnace design with tube walls, evaporators, superheaters, economizers, fans, stacks. Rating of steam generators. Fuels and combustion. Steam turbines: Impulse and reaction turbines, analysis and sizing. Turbine rating methods, turbine losses, gas turbines cycles (simple open, regenerative and cooled), Combined cycle, rating of gas and gas/steam cycles. Condensate- feed water system: Condensers types and designs, feed water heaters types and designs, dearators, make up water. Circulating water systems.
(3-0-3)
ME
528
ME
Description
Course Number:
0630528
Double-pipe heat exchangers. Shell and tube heat exchanger. Flow arrangements for increased heat recovery in shell and tube exchangers. Gases cooling and heating. Extended surfaces. Condensation of vapors and condensers design. Evaporation and evaporators. Steam generator design: Furnaces, superheaters, economizers, evaporators, cooling towers.
(3-0-3)
ME
529
ME
Description
Course Number:
0630529
Machinery for vapor compression systems: Compressors (reciprocating, rotary positive displacement and turbo), condensing equipment, evaporators, expansion valves, cooling towers. Equipment design, characteristic and rating methods, equipment matching. Multistage vapor compression systems. Ammonia absorption refrigeration system design and characteristics. Lithium bromide-water absorption system design and characteristics. Steam jet regeneration systems design. Cold storage. Defrosting methods.
(3-0-3)
ME
531
ME
Description
Course Number:
0630531
Conservation laws and Navier-Stokes equations closed-form solutions of standard viscous flow problems. Boundary layer theory. Ideal-fluid flow equations, potential flow. Elementary flows.
(3-0-3)
ME
532
ME
Description
Course Number:
0630532
Basic concepts of gas dynamics and gas properties. Subsonic flow. Supersonic flow. Hypersonic flow. Shock-wave phenomena. Dimensional analysis. Experimental techniques and other selected topics.
(3-0-3)
ME
533
ME
Description
Course Number:
0630533
Characteristics of different types of partial differential equations. Scalar representations of Navier-Stokes equations. Covarient and contravarient base vectors and calculus. Transformation of Navier-Stokes equations from physical space to computational space; Grid generation methods. Numerical methods for inviscid flows. Numerical methods for incompressible viscous flows.
(3-0-3)
ME
535
ME
Description
Course Number:
0630535
Design of submerged and falling film evaporators. Single and multi-effect desalting systems and component design. Multi-stage flash (MSF) desalting system design. MSF components design (pumps, stages, brine heater, evacuating system,..). Mechanical vapor compression desalting system. Reverse osmosis desalting systems.
(3-0-3)
ME
538
ME
Description
Course Number:
0630538
An upper division of graduate technical elective treating topics in mostly not covered in other courses, chosen at the discretion of the Graduate Program Committee.
(3-0-3)
ME
539
ME
Description
Course Number:
0630539
Availability analysis. Irreversible Thermodynmics applied to engineering systems. Energy Analysis for power plants, refrigeration systems. Equilibrium and stability of thermodynamics system. General relations.
(3-0-3)
ME
542
ME
Description
Course Number:
0630542
Fundamentals of manufacturing and automation, production systems (types, analysis, automation, simulation), numerical control production systems (NC, DNC, CNC, ACO, ACC) - industrial robotics (technology-programming, and application in manufacturing systems). Materials handling systems - flexible classification, coding machine cells, workstations, computer control). Control systems (feedback, optimal, sequence control). Computer integrated manufacturing (fundamentals of CAD/CAM computer planning of material process, and capacity) shop floor control and automation-order release, scheduling, identification systems. Computer network.
(3-0-3)
Prerequisites:
0630-342
ME
543
ME
Description
Course Number:
0630543
Stationary crack under static loading. Energy balance fracture mechanisms: Crack initiation and growth. Fracture modes. Stress intensity factors. Fracture toughness. Brittle and ductile fractures. Dynamic crack growth. Fatigue. crack propagation and component's life prediction. Experimental methods. Case studies.
(3-0-3)
ME
554
ME
Description
Course Number:
0630554
An upper division of graduate technical elective treating topics in Engineering mostly not covered in other courses, chosen at the discretion of the Graduate Program Committee.
(3-0-3)
ME
593
ME
Description
Course Number:
0630593
Project course for non-thesis students.
(3-0-3)